Kleemann K2 in the making
Oct 12, 2010 | 12:56 PM
#121
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
SLK is faster, when I got the XKR my SLK had an ecu,filters and secondary sport cats and x-pipe. XKR topspeed 270kmh, SLK55 290kmh
I have raced member (mak) when he had his 2006 CLS55 (stock) from zero to 200kmh I am in front by 2 1/2 car lenghts. That was when my car had just green filters,ecu, spare tyre delete. I've raced him later with the x pipe and sport rear cats and I was ahead by 2 car lengths.
I have raced member (mak) when he had his 2006 CLS55 (stock) from zero to 200kmh I am in front by 2 1/2 car lenghts. That was when my car had just green filters,ecu, spare tyre delete. I've raced him later with the x pipe and sport rear cats and I was ahead by 2 car lengths.
Oct 12, 2010 | 02:44 PM
#122
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Oct 13, 2010 | 10:39 AM
#123
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Short update:
Car was put on a dyno (dyno jet) The car made 366 rwhp and was running to lean, I think the MAF is off so they ordered a new one from Dubai which will arrive by Saturday/Sunday and re do the test.
Had it on the dyno, put down 366hp wheel, but the car runs too lean, so we aborted the run before redline.
Uploaded with ImageShack.us
My tech, Talked to claus and will do some tests tomorrow, maybe the air mass sensor is faulty, new one is ordered from dubai, will arrive after the weekend, then we see further.
He said in this climate it should put approx. 410-430 to the wheels.
LINK to dyno https://docs.google.com/fileview?id=...YWNmNmUw&hl=en
Car was put on a dyno (dyno jet) The car made 366 rwhp and was running to lean, I think the MAF is off so they ordered a new one from Dubai which will arrive by Saturday/Sunday and re do the test.
Had it on the dyno, put down 366hp wheel, but the car runs too lean, so we aborted the run before redline.
Uploaded with ImageShack.us
My tech, Talked to claus and will do some tests tomorrow, maybe the air mass sensor is faulty, new one is ordered from dubai, will arrive after the weekend, then we see further.
He said in this climate it should put approx. 410-430 to the wheels.
LINK to dyno https://docs.google.com/fileview?id=...YWNmNmUw&hl=en
, It is going to look better once the HRE's arrive. 
Oct 13, 2010 | 05:26 PM
#128
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Thank you, awesome kind of but its still lean.
A new MAF mass air flow sensor is going to arrive early next week and re-test the car again to see if its lean.
If the MAF is faulty in today's run, If it still lean, we have to be 100%checkup that is all is good on car and with the install, and then look into the to change software, but I kind of doubt that, The CEO of Kleemann, says it´s not normal we get the Software wrong.
So I am hoping that the MAF is faulty rather than the tune or my car, I dont want to ship the ECU back and forth.
A new MAF mass air flow sensor is going to arrive early next week and re-test the car again to see if its lean.
If the MAF is faulty in today's run, If it still lean, we have to be 100%checkup that is all is good on car and with the install, and then look into the to change software, but I kind of doubt that, The CEO of Kleemann, says it´s not normal we get the Software wrong.
So I am hoping that the MAF is faulty rather than the tune or my car, I dont want to ship the ECU back and forth.
Oct 23, 2010 | 01:21 PM
#129
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
New dyno attempt temp 38 degrees c humidity 4%
Run no 1 400hp and 412 tq
Run no 2 397hp and 419tq
This is with new maf installed previously it made 366
It's pretty hot and in winter it would put down more to the wheels and it's not lean anymore. I am going to post the dyno in an hour or two as I am in a shopping centre using my phone.
Run no 1 400hp and 412 tq
Run no 2 397hp and 419tq
This is with new maf installed previously it made 366
It's pretty hot and in winter it would put down more to the wheels and it's not lean anymore. I am going to post the dyno in an hour or two as I am in a shopping centre using my phone.
