Restoration of the Turbo 3.6 (964)
Feb 20, 2013 | 08:43 AM
#52
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
It's alive!!!!
They are finalising with the sideskirt seals today.
Tomorrow begins the new radio installation. Then they will just fix the door ding. The reason they are slow because the body shop is jam packed.
They are finalising with the sideskirt seals today.
Tomorrow begins the new radio installation. Then they will just fix the door ding. The reason they are slow because the body shop is jam packed.
Feb 21, 2013 | 09:58 AM
#56
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Yes. Its quiet loud in person.
I am going to get the car next thursday hopefully.
Whats left for the near future is:
2 weeks time:
Install new tail light set.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Later stage of this year:
1) Stone Chip Repair
2) 3M Clear Bra
3) Sunroof seal.
4) The Dot emblem that is between the 3 and the 6 (pretty common for it to fall).
5) New Windshield.
I am going to get the car next thursday hopefully.
Whats left for the near future is:
2 weeks time:
Install new tail light set.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Later stage of this year:
1) Stone Chip Repair
2) 3M Clear Bra
3) Sunroof seal.
4) The Dot emblem that is between the 3 and the 6 (pretty common for it to fall).
5) New Windshield.
Last edited by MeanMachine; Feb 21, 2013 at 10:12 AM.
Feb 24, 2013 | 03:04 AM
#58
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Lots of progress done over the past two weeks.
Replaced passenger door window button.
Installed passenger side taillight.
Adjusted CO.
Ordered Turbo switch and turbo 3.6 emblem because my car is missing the dot between the 3 & 6.
Sunroof seal also on order.
After that just needs a proper detail and 3m clearbra.
Radio
In order to perfect it the way I want:
3M Clear bra, centre taillight and driver tail light. full detail inside out and new turbo 3.6 emblem plus sunroof seal and I'm probably done.
Replaced passenger door window button.
Installed passenger side taillight.
Adjusted CO.
Ordered Turbo switch and turbo 3.6 emblem because my car is missing the dot between the 3 & 6.
Sunroof seal also on order.
After that just needs a proper detail and 3m clearbra.
Radio
In order to perfect it the way I want:
3M Clear bra, centre taillight and driver tail light. full detail inside out and new turbo 3.6 emblem plus sunroof seal and I'm probably done.
Last edited by MeanMachine; Feb 24, 2013 at 03:10 AM.
Feb 24, 2013 | 03:28 AM
#59
Teamspeed Pro
Joined: Aug 2007
Posts: 2,009
From: BAHRAIN
Amazing build MashaAllah. One thing is I wouldnt Dye the Leather as because of our hot and humid weather it might not Do so well. I would recommend you to take it to a car upholsterer and have the leather replaced. You can also buy ready made oem quality replacement leather covers and have the uplhosterer install them.
Feb 24, 2013 | 03:31 AM
#60
Thread Starter
| AMGFanatic
Joined: Feb 2008
Posts: 15,965
From: MonteCarlo
Amazing build MashaAllah. One thing is I wouldnt Dye the Leather as because of our hot and humid weather it might not Do so well. I would recommend you to take it to a car upholsterer and have the leather replaced. You can also buy ready made oem quality replacement leather covers and have the uplhosterer install them.
What bothers me with the car is the mechanical boost gauge by Greddy, I'll have it changed for a VDO to match the oem gauges.
