2007 Sallen Parnelli Jones Paint Correction & Detail
Oct 19, 2010 | 03:28 AM
#1
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
2007 Sallen Parnelli Jones Paint Correction & Detail
Just finished today(10-18-2010) this is a car which needed some pretty good paint correction, but other than that the owner takes VERY good care of it(unlike the previously completed job I did last week......).
Grabber orange with orange/black interior, cool American Muscleness to change the pace up from the usual(lol) eurotrash..........
The beginning.
Deep marring around hood latch.
After two hits w/compound and wool pad.
Marring on the top of front driver quarter panel.
Water spotting as well.
Front quarter panel finished down.
[B]More examples of marring.[/B
]
50/50 of same area.
Window cover before correction.
After.
Top of drivers rear quarter.
Marring all cleared up.
2.5 inch deep scratch near fuel filler cap.
Reading to make sure enough clear to work with.
Machine sanded.
Wool & foam pad compounded.
Marred tailights.
Cleared up.
Marring on rear bumper.
50/50's.
Grabber orange with orange/black interior, cool American Muscleness to change the pace up from the usual(lol) eurotrash..........
The beginning.
Deep marring around hood latch.
After two hits w/compound and wool pad.
Marring on the top of front driver quarter panel.
Water spotting as well.
Front quarter panel finished down.
[B]More examples of marring.[/B
]
50/50 of same area.
Window cover before correction.
After.
Top of drivers rear quarter.
Marring all cleared up.
2.5 inch deep scratch near fuel filler cap.
Reading to make sure enough clear to work with.
Machine sanded.
Wool & foam pad compounded.
Marred tailights.
Cleared up.
Marring on rear bumper.
50/50's.
Oct 19, 2010 | 03:29 AM
#2
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
Corrected.
Cluster of scratches.
Whole top of bumper smoothed out.
Checking one scratch that needed multiple passes to level.
DeWalt with it's torque and a edge wool pad making quick work of the scratches.
Same area all polished down.
Front bumper needed some love.............
After.
Factory graphics were faded and marred, tricky steps needed as I could not "Shine up" the matte finish.
50/50 of the rear wing.
Entire trunk/wing assembly looking better.
Correction work done, while the LSP was curing(Menz Powerlock in this case) it was time to strip the tires and polish the wheels.
A few final pics before going outside for sun pics(almost missed the sun again......winter is coming shorter days(not good).
Cluster of scratches.
Whole top of bumper smoothed out.
Checking one scratch that needed multiple passes to level.
DeWalt with it's torque and a edge wool pad making quick work of the scratches.
Same area all polished down.
Front bumper needed some love.............
After.
Factory graphics were faded and marred, tricky steps needed as I could not "Shine up" the matte finish.
50/50 of the rear wing.
Entire trunk/wing assembly looking better.
Correction work done, while the LSP was curing(Menz Powerlock in this case) it was time to strip the tires and polish the wheels.
A few final pics before going outside for sun pics(almost missed the sun again......winter is coming shorter days(not good).
Thread
Thread Starter
Forum
Replies
Last Post
Auto Concierge
Detailing & Paint Protection
4
Aug 15, 2011 02:03 PM
MoeMistry
Detailing & Paint Protection
52
Apr 9, 2008 04:42 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
