Modified BMW M3 Paint Correction & Detail
#1
08-15-2011, 12:08 AM
Modified BMW M3 Paint Correction & Detail
Recently completed job in the shop, Alpine White with every mod almost that can be installed on a late model M3.
The vehicle had some paint work done and the finish was not "finished down", with sand scratches and deep tracers along with built up marring.
After a wash/Iron X/clay step i proceeded to the paint correction ....
Marring on the hood.
Bombing run by a local bird.
Defect removed.
Deep RIDS.
Decklid now smooth and clear.
Readings from the composite wing.....................I think there is enough to work with(Understatement..).
Before.
After compounding.
Two spots had deep defects, so I sanded lightly.
After.
Black trim was not looking very nice.
During compound stage.
Enough clear for correction, but still getting on the thin side.
Marred front quarter.
Marring & shrink from the re-spray corrected.
Shrink and marring on passenger door.
Leveled finish with M105 and Black Edge Wool.
Decklid edge marring.
After compounding.
The vehicle had some paint work done and the finish was not "finished down", with sand scratches and deep tracers along with built up marring.
After a wash/Iron X/clay step i proceeded to the paint correction ....
Marring on the hood.
Bombing run by a local bird.
Defect removed.
Deep RIDS.
Decklid now smooth and clear.
Readings from the composite wing.....................I think there is enough to work with(Understatement..).
Before.
After compounding.
Two spots had deep defects, so I sanded lightly.
After.
Black trim was not looking very nice.
During compound stage.
Enough clear for correction, but still getting on the thin side.
Marred front quarter.
Marring & shrink from the re-spray corrected.
Shrink and marring on passenger door.
Leveled finish with M105 and Black Edge Wool.
Decklid edge marring.
After compounding.
#2
08-15-2011, 12:09 AM
Carbon splitter had sand scratches & marring.
Correction of the defects.
Brembo "Tightness" not looking it's best.
Better.
Wheel well crust.
Cleaned up.
New HRE P40S wheel polished and sealed.
My new nieghbor next door (Alek from "Alekshop") torqued the wheels to spec.
Dusty dry engine bay.
Looking good.............with gofast goodies(Supercharger).
Inside of hood cleaned.
Interior pics.
Finished product.
If you do not like this profile...................you are not a "Carguy" .
Akrapovic tightness peaking out.
Correction of the defects.
Brembo "Tightness" not looking it's best.
Better.
Wheel well crust.
Cleaned up.
New HRE P40S wheel polished and sealed.
My new nieghbor next door (Alek from "Alekshop") torqued the wheels to spec.
Dusty dry engine bay.
Looking good.............with gofast goodies(Supercharger).
Inside of hood cleaned.
Interior pics.
Finished product.
If you do not like this profile...................you are not a "Carguy" .
Akrapovic tightness peaking out.
Thread
Thread Starter
Forum
Replies
Last Post
Auto Concierge
Detailing & Paint Protection
13
11-14-2011 02:23 AM
Smoke
Detailing & Paint Protection
7
05-15-2011 09:30 PM
Auto Concierge
991 | 997 | 996 Turbo
5
02-04-2011 10:03 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)