2009 Modified BMW M3 sedan Detail
#1
02-21-2011, 07:41 PM
2009 Modified BMW M3 sedan Detail
Recently completed, this modified Alpine White M3 needed some correction to look it's best.
Love the HRE P40S wheels and other subtle mods done to the car.
After wash/clay steps were carried out, the paint correction steps were started. The white finish was difficult to capture some of the defects, thus some pics were taken with different settings on my camera.
50/50 pics of the trunk area.
Marring on drivers door.
Wool pad compounding step.
Marring & RIDS on passenger side door.
After compounding.
Finish after using Meguiars new DA compound.
As the owner has completed a few open track days the lower parts of the car needed some attention.
After clean up.
Finish after polishing.
"B" pillars with the usual marring & RIDS.
Defects removed.
Getting into the tight areas with the DA Polisher.
Love the HRE P40S wheels and other subtle mods done to the car.
After wash/clay steps were carried out, the paint correction steps were started. The white finish was difficult to capture some of the defects, thus some pics were taken with different settings on my camera.
50/50 pics of the trunk area.
Marring on drivers door.
Wool pad compounding step.
Marring & RIDS on passenger side door.
After compounding.
Finish after using Meguiars new DA compound.
As the owner has completed a few open track days the lower parts of the car needed some attention.
After clean up.
Finish after polishing.
"B" pillars with the usual marring & RIDS.
Defects removed.
Getting into the tight areas with the DA Polisher.
#2
02-21-2011, 07:44 PM
After the paint correction task was completed, I next moved on to the engine bay.
After clean up before final dressing applied.
Finished engine pics.
Next step was to dismount the wheels for cleaning, while I was at it I re-indexed the center caps to line up with the valve stem cover(small details...).
Center cap lined up.
Dirty wheels.
Cleaned and sealed.
Wheel wells needed some attention.
After clean up before final dressing applied.
Finished engine pics.
Next step was to dismount the wheels for cleaning, while I was at it I re-indexed the center caps to line up with the valve stem cover(small details...).
Center cap lined up.
Dirty wheels.
Cleaned and sealed.
Wheel wells needed some attention.
#3
02-21-2011, 07:45 PM
Clean before dressing application.
Before.
After.
Passengerside wheel well before.
After.
Finished wheel well, dressed for a satin not greasy look.
Akrapovic tightness.........
Cleaning all door jamb areas.
Before.
After.
On the home stretch....
As there is "Pilot Cup Sports" on the car, tires were dressed to a low matte finish.
Cleaning edge of the glass(Pet peeve of mine and required step in my shop).
Cleaned.
#4
02-21-2011, 07:47 PM
Interior was pretty clean, general wipedown and matte dressing applied. Mats were steamed as well.
Subtle styling mod....Black "Kidney grill".
A few sun pics.
Subtle styling mod....Black "Kidney grill".
A few sun pics.
#5
02-21-2011, 08:12 PM
great job. how many hours?
the exhaust, the euro bumper and your detail job go a long way in showing that the owner spares no expense.
the exhaust, the euro bumper and your detail job go a long way in showing that the owner spares no expense.
#6
02-21-2011, 08:41 PM
Thank you, the owner does have taste and it shows. Approx 22 hours went into the job.
Thread
Thread Starter
Forum
Replies
Last Post
Auto Concierge
Detailing & Paint Protection
11
01-05-2012 04:34 PM
Auto Concierge
Detailing & Paint Protection
4
08-15-2011 02:03 PM
Auto Concierge
Detailing & Paint Protection
9
02-21-2011 09:09 PM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)