Very nice, will def. keep you in mind

 

Scott, where/how does the stealth enclosure typically mount?

 

That is awesome, thanks for showing the pictures of the custom enclosure. I will definitely have to have this done in the future. I'm assuming that you guys could just as easily integrate the display of a laser jammer too, right?

 

It just depends on the mirror, some of them are packed full of electronics and we're limited as to what will fit. You can do at least one gauge + a radar display in the GTR. I'll shoot you a PM.



You can mount it on a rear deck or attach it to the headliner, which is where the part is actually intended to go. We make these using an oem motion sensor cover from a BMW. If this is for a 911 it's a little tough because the car doesn't really have a rear deck. You would need to fabricate a base that's a few inches high to get the detector up in line with the bottom of the front and rear glass. Mounting down below the glass puts metal in the way and will affect reception. The ideal place for the detector in a 911 is inside the rear portion of the headliner. You will lose laser alerts but most don't worry b/c laser detectors aren't effective. If you see a lot of laser where you drive get a laser jammer.

Yes, we don't have it up on our site yet but we can put a display for pretty much any system in the mirror. We have a custom display we fabricate for the Laser Interceptor.

 

What do you have for a 911 cab v1 system . Hide away unit. Please pm Thanks

 

If you want to hide the V1 on the cab you will need to use our Stealth V1 Enclosure and mount it here. Additional modification to the base of the enclosure may be required for it to sit flush.