2010 Porsche GT3 correction
Jan 7, 2010 | 09:35 PM
#1
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
2010 Porsche GT3 correction
Brand new GT3 in Guards Red, vehicle was in great condition........ in the interior but had some issues on the finish.
This vehicle will be featured in a major magazine in a month or two and was driven quite a bit for the article, thus it was a little dirty.
Dirty wheels
Thorough wash was needed
Final rinse with DI water
Vehicle was brought inside for claying step
After the wash and clay, this was the marring apparent when the wax was stripped off
Underside of the wing had some pretty nasty marring on the lower part
After compounding step
Rear wing had some marring as well, most of the deeper defects were on the rear and front bumpers
After correction
Door taped off for 50/50 pics
50/50 pic with compounded finish on the right side
Front driver side bumper before
After
Just barely enough room to correct the decklid(this is a PITA)
Making headway on the job
Finish is now corrected and LSP applied
This vehicle will be featured in a major magazine in a month or two and was driven quite a bit for the article, thus it was a little dirty.
Dirty wheels
Thorough wash was needed
Final rinse with DI water
Vehicle was brought inside for claying step
After the wash and clay, this was the marring apparent when the wax was stripped off
Underside of the wing had some pretty nasty marring on the lower part
After compounding step
Rear wing had some marring as well, most of the deeper defects were on the rear and front bumpers
After correction
Door taped off for 50/50 pics
50/50 pic with compounded finish on the right side
Front driver side bumper before
After
Just barely enough room to correct the decklid(this is a PITA)
Making headway on the job
Finish is now corrected and LSP applied
......jk 
