SharkWeek Continues... Classic Stage II with some new Werks1 Goodies!
#1
SharkWeek Continues... Classic Stage II with some new Werks1 Goodies!
This 2008 GT Silver 997TT project came in for a full Stage II line of upgrades including more power (via the EVOMSit tuning, Tubi Exhaust & Werks1 goodies), improved handling (Bilstein PASM coil over kit) and some other tasty visual aids.
The car is first tuned via the EVOMSit software suite for 91 octane with improved throttle as well in both normal and sport modes.
The Werks1 goodies on the table. Carbon fiber is not only light but also helps keep temperatures down vs cast metal materials. These are extremely high-quality and 100% carbon (not overlay). It makes for a great excuse to use a larger throttle body too (more on that in a minute).
On the left you see the smaller stock 997TT throttle body vs. the larger 997GT3 throttle body on the right.
The Werks1 carbon fiber t-pipe alongside the larger diameter throttle body.
The dressed-up engine bay with the larger diameter Werks1 carbon fiber Y-pipe, T-pipe and 997GT3 throttle body all installed.
In go the Bilstein PASM compatible coil overs and the resultant 1.25 inch lowered ride height:
The RSS bumpsteer/toe-steer upgrade:
We installed the slightly more aggressive looking Aerokit lip:
The gen1 Tubi street exhaust installed (earlier):
TechArt dual chrome tips installed:
Over to the interior and the B&M short shifter kit is installed along with the thicker diameter TechArt steering wheel:
The customer went with 20 inch Neez wheels:
And ready to go home!
The car is first tuned via the EVOMSit software suite for 91 octane with improved throttle as well in both normal and sport modes.
The Werks1 goodies on the table. Carbon fiber is not only light but also helps keep temperatures down vs cast metal materials. These are extremely high-quality and 100% carbon (not overlay). It makes for a great excuse to use a larger throttle body too (more on that in a minute).
On the left you see the smaller stock 997TT throttle body vs. the larger 997GT3 throttle body on the right.
The Werks1 carbon fiber t-pipe alongside the larger diameter throttle body.
The dressed-up engine bay with the larger diameter Werks1 carbon fiber Y-pipe, T-pipe and 997GT3 throttle body all installed.
In go the Bilstein PASM compatible coil overs and the resultant 1.25 inch lowered ride height:
The RSS bumpsteer/toe-steer upgrade:
We installed the slightly more aggressive looking Aerokit lip:
The gen1 Tubi street exhaust installed (earlier):
TechArt dual chrome tips installed:
Over to the interior and the B&M short shifter kit is installed along with the thicker diameter TechArt steering wheel:
The customer went with 20 inch Neez wheels:
And ready to go home!
#6
Thanks and me too
Rare!
Thank you!
#9
Yes it's a nice set up and dresses things up back there
Thread
Thread Starter
Forum
Replies
Last Post
sharky
991 | 997 | 996
0
01-28-2011 03:27 PM
sharky
991 | 997 | 996 Turbo
5
01-08-2011 02:53 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)