Giallo Ferrari 16M Correction
#1
Giallo Ferrari 16M Correction
Just completed Scuderia 16M, brought in Mark Zamzow to help me with this one and the black 16M done last week.
After thorough wash/clay process the car was dried completly
Following pics will show that even "New" cars will require quite a bit of paint correction(1,100 miles on the odometer)
Deep machine induced holograms near the air intake
More marring
Deep scratches on the decklid required sanding to level them
After compounding
After intermediate polishing
Sanded the hood on the livery stripe
After compounding on the stripe only
More scratches near the turn signal indicator
Removed
Trick I picked up from Dave @ Street Dreams detail in New Jersey(back light the panel with over head lighting off to emphasize the paint defects)
Sand scratches on the rear carbon grill
After compounding
Close up pic of the grill showing all the sand scratches removed
During the fine polishing stage(jewelling)checking the finish with LED tactical light to see the finish is where it needs to be
No correction display shot, just thought this angle looked good
On EVERY Ferrari I have done..... there is left over wax or compound on the raised letters of the third brake light
Taking a fine boars hair brush and handling this issue
After thorough wash/clay process the car was dried completly
Following pics will show that even "New" cars will require quite a bit of paint correction(1,100 miles on the odometer)
Deep machine induced holograms near the air intake
More marring
Deep scratches on the decklid required sanding to level them
After compounding
After intermediate polishing
Sanded the hood on the livery stripe
After compounding on the stripe only
More scratches near the turn signal indicator
Removed
Trick I picked up from Dave @ Street Dreams detail in New Jersey(back light the panel with over head lighting off to emphasize the paint defects)
Sand scratches on the rear carbon grill
After compounding
Close up pic of the grill showing all the sand scratches removed
During the fine polishing stage(jewelling)checking the finish with LED tactical light to see the finish is where it needs to be
No correction display shot, just thought this angle looked good
On EVERY Ferrari I have done..... there is left over wax or compound on the raised letters of the third brake light
Taking a fine boars hair brush and handling this issue
#3
Giallo 16M Correction Cont........
Matte finish wheels cleaned, and tires stripped for proper dressing application
Working on the carbon diffuser
Laying down on the job............
Polishing the carbon doors= tightness(love this part of the car!!!)
Had Rob @ The paddock in Danville make me a custom frame for this client, frame turned out great and is worthy of this car
This interior is different than all the other Scuderia"s I have worked on as they had entire interiors finished with Alcantara and this was sporting leather
All ready to go
Out going with incoming Rosso Corso, which will be completed at the end of this week and will have a write up as well.
Working on the carbon diffuser
Laying down on the job............
Polishing the carbon doors= tightness(love this part of the car!!!)
Had Rob @ The paddock in Danville make me a custom frame for this client, frame turned out great and is worthy of this car
This interior is different than all the other Scuderia"s I have worked on as they had entire interiors finished with Alcantara and this was sporting leather
All ready to go
Out going with incoming Rosso Corso, which will be completed at the end of this week and will have a write up as well.
Thread
Thread Starter
Forum
Replies
Last Post
RonnieRenaldi
458 | 430 | 360
57
09-30-2014 09:58 PM
RacingEngineV8
458 | 430 | 360
8
10-12-2011 03:10 AM
Clever Nickname
Detailing & Paint Protection
2
07-04-2010 10:57 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)