LUM-TEC casual dress watch concepts
#1
LUM-TEC casual dress watch concepts
We are working on a more casual series of watches that still have a sporty LUM-TEC look yet would look right at the office as well. We will probably make these in 39-41mm. and 43-45mm. sizes. Here are the concepts we have made so far.
A few details that may nore be apparent in the drawings:
Dials have raised applied polished steel markers with holes cut all the way through the dial and filled with lume. This will give the dials a more polished look with the small lume markers but as they will be about 1mm tall and hand filled, they will still glow very good.
Concepts show all polished finishing. Production will most likely be a mix of polished and brushed finishes. Similar to our 500M-1 or Lumzilla SS model finishes.
The case will be very thin! probably around 10mm.
Movement will likely be either the Miyota 9015 or ETA 2892-A2.
Hands are high polished steel finish.
Case is designed to work well with any type of strap. Bracelet will be standard as well as leather straps.
Screw down crown.
100 Meters water resistance.
Sapphire crystal with clear AR coating.

A few details that may nore be apparent in the drawings:
Dials have raised applied polished steel markers with holes cut all the way through the dial and filled with lume. This will give the dials a more polished look with the small lume markers but as they will be about 1mm tall and hand filled, they will still glow very good.
Concepts show all polished finishing. Production will most likely be a mix of polished and brushed finishes. Similar to our 500M-1 or Lumzilla SS model finishes.
The case will be very thin! probably around 10mm.
Movement will likely be either the Miyota 9015 or ETA 2892-A2.
Hands are high polished steel finish.
Case is designed to work well with any type of strap. Bracelet will be standard as well as leather straps.
Screw down crown.
100 Meters water resistance.
Sapphire crystal with clear AR coating.

#3
Great start! Will 100% be buying if you make a 43... Agree wit mike, would also like to see it on leather.
What sort of price point are y'all thinking? Lastly any chance of making the LUM-TEC smaller? Might make it a little classier.
What sort of price point are y'all thinking? Lastly any chance of making the LUM-TEC smaller? Might make it a little classier.
#7
Black face, brushed finish, Polished bezel, shrink the LT logo, 45mm, nice looking high-end black leather strap with deployant clasp, and I will own my 4th LumTec.
Please do whatever you can to produce the super combats ASAP!
Please do whatever you can to produce the super combats ASAP!
Thread
Thread Starter
Forum
Replies
Last Post
-eztrader-
The Watch Forum
19
Jul 12, 2012 03:09 PM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)











