Aprilia RSV4-R launch cut short - | Motorbike reviews | Latest Bike Videos | MCN


The launch of the new Aprilia RSV4-R at Mugello was cut short yesterday after five of the bikes suffered terminal con rod failures. Senior Road Tester, Michael Neeves was there:
“I did two 20-miniute sessions at the high-speed Italian track on the RSV4-R, which is a slightly lower spec version of the Factory model launched earlier this year. I had no problems with my bike but five others expired.

“It’s extremely unusual for something like this to happen on a modern motorcycle, not least an Aprilia. Their machines are more ‘Honda-like’ than any Italian manufacture and their engines usually bomb-proof.

“The launch bikes were pre-production machines with just 300km on the clock. Aprilia found the problem very quickly and traced it to a manufacturing fault with a batch of con rods.
"For safety’s sake they suspended the three-day launch after two sessions and delayed it for a further two days.

“No production bikes have been produced yet, so this problem should remain an isolated problem on these 30 launch bikes.
"As far as I know, there have been no issue with any of the RSV4 Factory-spec machines produced.”
Phil Read of Piaggio was at the launch and said: “These are the first 30 pre-production models.

"On all of them, we’ve found a crack in the forged conrod. The machined big end hole is slightly off-centre, so one side of the rod is thinner than the other and that’s where the crack has occurred.
"We’ve contacted the supplier and are meeting with them now. It won’t cause any major delays in production.”
Read our full report on the RSV4-R in next week’s MCN

 

Wonder how recent this is. Guys in Europe already have theirs. US bikes should be available to customers in the next week or so.

EDIT: I guess it refers to the "R" model only and no the Factory version.

 

Make it a twin and I'll buy one. (I really can't go back to a i4 bike...)

 

Wow, that could have really fugged up a journo riding it!