0-60 Motorsports E46 M3 from BAHRAIN
May 3, 2012 | 08:18 AM
#175
Thread Starter
| Teamspeed Pro
Joined: Aug 2007
Posts: 2,009
From: BAHRAIN
You Jokers! heres an update for ya'all
The Bimmer world C&R Racing Oil Cooler arrived so fast I hardly had time to realize it had been delivered to my house. The timing is perfect because the temps are begining to climb in Bahrain already reaching 33-40c
Here are the pics....
Comparison pics between OEM oil cooler on top and Bimmerworld at the bottom. The BW C&R Racing Direct-fit, dual-pass cooler - 25% more cooling capacity than stock is at least 30% larger than the OEM oil cooler. The capacity has also doubled...
Time to install....
The two mounting holes needed a bit of modding/filing. 5 secs and it was done...
Before
after..
Installed If you notice we pulled the rubber part of the cover under the cooler so it kinda holds the rubber piece cover there and directs airflow into the cooler...
BW Oil cooler pics through front bumper. Very Stealth as its hardly even noticeable...
As I have the OEM CSL intake and all the associated tubing I had a little bit of an issue with reinstalling the oil lines back as the lower CSL Intake hose was in the way. Pulled it away a bit and connected the lines All good and no need for any cutting or modding in any way....
STOPTECH ST40 355mm Drilled BBK installed....
A Shot of my SS RACE or SS Sport as its known in the USA...
New hood Struts....
YUM
The Bimmer world C&R Racing Oil Cooler arrived so fast I hardly had time to realize it had been delivered to my house. The timing is perfect because the temps are begining to climb in Bahrain already reaching 33-40c
Here are the pics....
Comparison pics between OEM oil cooler on top and Bimmerworld at the bottom. The BW C&R Racing Direct-fit, dual-pass cooler - 25% more cooling capacity than stock is at least 30% larger than the OEM oil cooler. The capacity has also doubled...
Time to install....
The two mounting holes needed a bit of modding/filing. 5 secs and it was done...
Before
after..
Installed
If you notice we pulled the rubber part of the cover under the cooler so it kinda holds the rubber piece cover there and directs airflow into the cooler...BW Oil cooler pics through front bumper. Very Stealth as its hardly even noticeable...
As I have the OEM CSL intake and all the associated tubing I had a little bit of an issue with reinstalling the oil lines back as the lower CSL Intake hose was in the way. Pulled it away a bit and connected the lines
All good and no need for any cutting or modding in any way....STOPTECH ST40 355mm Drilled BBK installed
....A Shot of my SS RACE or SS Sport as its known in the USA...
New hood Struts....
YUM
May 3, 2012 | 05:24 PM
#178
Thread Starter
| Teamspeed Pro
Joined: Aug 2007
Posts: 2,009
From: BAHRAIN
Feb 7, 2013 | 05:52 PM
#179
Thread Starter
| Teamspeed Pro
Joined: Aug 2007
Posts: 2,009
From: BAHRAIN
Here is a sweet Update. So I got my SS V1 Headers and Cat Delete Pipes around 10 days back but couldn't get time to install them. Finally got a chance today to drop the car off at the shop to cool off so we can start the work on Saturday....
Some pics....
The Vibratechincs Engine Mounts will be going in too.....
This is how I left her to cool down.....
More updates to follow on Saturday hopefully......
Some pics....
The Vibratechincs Engine Mounts will be going in too.....
This is how I left her to cool down.....
More updates to follow on Saturday hopefully......
Thread
Thread Starter
Forum
Replies
Last Post
Parvin@EVOMS.com
Southern California (US)
0
Oct 12, 2011 12:43 PM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
