2011 997.2 GT3RS SharkWerks Project: Exhaust, EVOMSit & Champion RS20 CL Wheels
Dec 9, 2010 | 04:17 PM
#1
Thread Starter
| Former Sponsor
Joined: Feb 2008
Posts: 1,405
From: Northern California
2011 997.2 GT3RS SharkWerks Project: Exhaust, EVOMSit & Champion RS20 CL Wheels This lovely charcoal and bronze themed 2011 997.2 GT3RS project came into us for a few choice upgrades, including the SharkWerks exhaust for the sound department, a bit more power with the EVOMSit software and a lighter set of wheels in the form of the Champion Motorsport RS20s.
On the deck for surgery...
Off comes the bumper:
And then the heat shields:
The titanium factory center section is removed and the SharkWerks exhaust installed in its place. There is still an 8-pound weight reduction wit our part:
The factory Titanium tips can be re-used with our exhaust system:
A close-up of the light-weight single piece Champion RS20 wheel in the rear:
Bumper back on... this car came from Champion Porsche in Florida originally...
On goes the EVOMSit software calibrated for 91 octane. The sport function is still retained with both settings getting more aggressive throttle maps.
The stock interior before the addition of the Rennline pedal kit...
Now with the Rennline pedal kit:
Clear side markers are added:
Ready for a test drive...
Rear RS20 wheel:
She's still on-going and next up are the Schroth Harnesses, some track-themed suspension components, an RSS rollbar and SharkWerks FE kit. So more to come
If anyone is interested in a set of these Champion Motorsport RS20 wheels let me know as we actually are stocking them
On the deck for surgery...
Off comes the bumper:
And then the heat shields:
The titanium factory center section is removed and the SharkWerks exhaust installed in its place. There is still an 8-pound weight reduction wit our part:
The factory Titanium tips can be re-used with our exhaust system:
A close-up of the light-weight single piece Champion RS20 wheel in the rear:
Bumper back on... this car came from Champion Porsche in Florida originally...
On goes the EVOMSit software calibrated for 91 octane. The sport function is still retained with both settings getting more aggressive throttle maps.
The stock interior before the addition of the Rennline pedal kit...
Now with the Rennline pedal kit:
Clear side markers are added:
Ready for a test drive...
Rear RS20 wheel:
She's still on-going and next up are the Schroth Harnesses, some track-themed suspension components, an RSS rollbar and SharkWerks FE kit. So more to come
If anyone is interested in a set of these Champion Motorsport RS20 wheels let me know as we actually are stocking them
Last edited by sharky; Dec 9, 2010 at 04:36 PM.
