Completed today(11-27-2010) this car was one of my more challenging vehicles I have done recently. The paint issues were many(re-spray on the whole drivers side of the car) with sand scratches, deep marring and everywhere except the re-sprayed areas paint thiness averaging in the 100 micron measurement.

Here is the beginning.

Sand scratches.



After initial pass with M105 and wool on the rotary.



Nice scuff on the rear bumper.



The rear decklid was re-sprayed as well, in addition to the deep marring the body shop had put the "GT3" badge on crooked......that alone made me remove it and order a new one from the dealer.



First of the 50/50 pics.









Deep RIDS & marring.............lovin it.



After the initial cleaning there was still quite a bit of tar and rubber on the wheels which was evidence of "Track B**ch" status from the previous owner.



Missing my lift in the shop about this time.....



Bird drop etch along with the marring.



Marring and holograms.................my favorite (especially on hard paint suckness).



More pics of "The horror".



Rear fender clear film was not looking good...........



After the first step of compounding.



After medium polishing, the film looked pretty good after the jewelling step later in the job.



The previous owner must have been a "Nail salon owner" look at the marring.





After initial compounding stage.

 

More sand scratches.



Corrected out.



Body shop missed these sand scratches too(Notice a trend?) lol.



Trying out some new gear(which I cannot talk about yet).



Working the passenger front quarter.



Looking better.



DA sanding marks.



After compounding.



Bird poop etch.



Not much to work with here, I treaded lightly(understatement).



After compounding.



All gone........



Did I already mention I miss my lift?.



Finish is coming back!!!







Fortunate to be working in this economy.........and while it is pouring rain.



Checking the finish during fine polishing.





As it would turn out this was the only sun pic I could take.

 

Dirty engine bay.













Working the steamer.



Crusty area after apc/steam before polishing the paint.



Everything cleaned, now dressing applied and then polish all painted areas.



Removed the wing and corrected the finish in this area.



After medium polishing step.



Underside of the wing had heavy peel(Imagine that!), so I sanded with Unigrit 1500/trizact 3000/Abralon mesh 4000.







"GT3" New badge affixed.



Finished engine bay.



No sun pics today:sorry:



Interior pics.

 

"Supercleaness".









Cleaned this area which usually gets missed(area at the bottom of the rear window.









The car has lot's of "Patina" still, but the new owner is going to also take it to the track where this car belongs.

 

speechless. Nice work.

 

Great great work!

 

Nice work! How much does a full detail like that run?

 

Impressive what you have done to revive this paint!

 

quite the transformation...great work!

 

Wow excellent work. What was your cleaning/polishing procedure on the clear bra?