Development objective: identify road profile, understand driver's wishes.

As a result of further development there is now the possibility to adapt gearshift commands given by the transmission control system to each driving situation even more flexibly and at the same time more accurately. The anticipatory transmission control system currently in the advance development stage utilises, in addition to the driver's intention, further information to take into consideration road surface conditions, road topology as well as the traffic situation when selecting the ideal gear. For this purpose, the transmission control system is linked to both the DSC (Dynamics Stability Control) function as well as the navigation system in the initial stage. In the configuration levels that follow, a link-up with the cameras utilised for the driver assistance systems or radar and additional sensors respectively is under consideration.

The data provided by the DSC sensors pertaining to the road surface friction coefficient help the system particularly in the case of low friction coefficients to prepare optimally for the typical control intervention during the acceleration phase that follows. Using the data provided by the navigation system, it is possible to determine the radius of a bend long before it is approached. Based on this information the transmission control system then determines with even greater accuracy the gear required for a smooth driving manoeuvre and confident acceleration out of the bend. Moreover, using information provided by cameras and radar sensors and pertaining to the traffic situation ahead of the vehicle, it will in future be possible to determine for example the required amount of deceleration and adapt the drive management to each specific situation.

In practice and thanks to this anticipatory control system, the automatic transmission adapts remarkably accurately to the situation-related requirements and demands of the driver. As a result of the complexity of the factors taken into consideration by the control system, the automatic transmission selects the appropriate gear similarly as foresighted as an experienced driver using a manual gearbox. It assists the driver with fast and appropriate response, which immediately leads to an increase in driving pleasure and optimised efficiency. Hence, the interaction between driver and vehicle reaches a new dimension.

Source [Autoblog via BMW]

 

It's incredibly advanced technology, but on the other hand, I want to feel the road and react to it with my own shift and steering inputs, not sensors and computers.

Thanks for the info and post, DJ.

 

I dont think I will ever by a car newer than 2010... As cool as this stuff is, it takes away from the driving experience IMO, and is just one more thing to "break" and have the dealer "fix"

 

All i can think is great, a 10k fender bender lol.