2014 Porsche Turbo S Detail & Coating
Jan 18, 2014 | 02:17 AM
#1
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
2014 Porsche Turbo S Detail & Coating
New 2014 Porsche Turbo S to start the new year right, since the first pics and video's were released I have been waiting for this car to grace my shop and it is "All that and a bag of chips"
Truly a new car prep and coating, as some recent vehicles I have completed that were new came in with issues and this car was not damaged and very light marring in a few spots. After a through wash/decon I set out to look for defects and the roof area had some light marring as mentioned.
All cleared up.
Wheels and calipers were being coated, so enlisted James from Sharkwerks to use his big bucks torque wrench for centerlock Porsche wheels and the fact I know of nobody with more Porsche tech knowledge personally to complete the task right.
Barrels cleaned, polished then coated.
Coating the calipers.
It was a little dirty in the wells but not enough for a before pic, shrouds and suspension components dialed in.
There was some marring on the left side of the front bumper, nothing to get excited about though.
Late night polishing.
997 Gen 1. sharing the shop with the new younger brother.
Coating on, checking for high spots.
With the hydrophobic properties.
Gloss Black windows on point.
All trim dressed with a satin finish.
Underside of the wing and all painted areas coated.
Clear paint and wide hips......................
More wet gloss.
Adult spec........GT Silver over the Dark Red for Porsche cleaness.
A little Carbon Fiber cannot hurt..........
Curvy Girl.........
As I have mentioned in the past.......................if you do not like this, there IS a problem.............. as good as it gets presently.
Ready to go.
Truly a new car prep and coating, as some recent vehicles I have completed that were new came in with issues and this car was not damaged and very light marring in a few spots. After a through wash/decon I set out to look for defects and the roof area had some light marring as mentioned.
All cleared up.
Wheels and calipers were being coated, so enlisted James from Sharkwerks to use his big bucks torque wrench for centerlock Porsche wheels and the fact I know of nobody with more Porsche tech knowledge personally to complete the task right.
Barrels cleaned, polished then coated.
Coating the calipers.
It was a little dirty in the wells but not enough for a before pic, shrouds and suspension components dialed in.
There was some marring on the left side of the front bumper, nothing to get excited about though.
Late night polishing.
997 Gen 1. sharing the shop with the new younger brother.
Coating on, checking for high spots.
With the hydrophobic properties.
Gloss Black windows on point.
All trim dressed with a satin finish.
Underside of the wing and all painted areas coated.
Clear paint and wide hips......................
More wet gloss.
Adult spec........GT Silver over the Dark Red for Porsche cleaness.
A little Carbon Fiber cannot hurt..........
Curvy Girl.........
As I have mentioned in the past.......................if you do not like this, there IS a problem.............. as good as it gets presently.
Ready to go.
Thread
Thread Starter
Forum
Replies
Last Post
Lucci Elite Detail
Detailing & Paint Protection
3
May 28, 2014 12:22 PM
Auto Concierge
Detailing & Paint Protection
1
Mar 25, 2014 08:02 AM
Auto Concierge
Detailing & Paint Protection
5
Feb 6, 2014 06:08 PM
Auto Concierge
Detailing & Paint Protection
6
Jan 21, 2014 08:36 PM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
