Rosso Scuderia 458 Detail
Jun 3, 2012 | 12:54 AM
#1
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
Rosso Scuderia 458 Detail
Here is the car last October @ Premier, I did the prep and then the clearfilm was installed.
Compound in the the most hard to reach area of the car.
Removed.
The usual marring and sand scratches.
All lights in the shop turned off to backlight the panel, marring & defects removed.
Silver dollar sized cluster of DA sand scratches.
Same area now looking beautiful.
Close up of the area corrected.
Deep holograms on rear deck.
Corrected on the left, holograms visible on the right of the tape line.
Sand scratches on the door handle.
Smooth & clear .
Fingernail marring above door handle.
M101 handled this quickly.
Yes .....................even sand scratches on the turn signal indicators.
Corrected.
Compound in the the most hard to reach area of the car.
Removed.
The usual marring and sand scratches.
All lights in the shop turned off to backlight the panel, marring & defects removed.
Silver dollar sized cluster of DA sand scratches.
Same area now looking beautiful.
Close up of the area corrected.
Deep holograms on rear deck.
Corrected on the left, holograms visible on the right of the tape line.
Sand scratches on the door handle.
Smooth & clear .
Fingernail marring above door handle.
M101 handled this quickly.
Yes .....................even sand scratches on the turn signal indicators.
Corrected.
Jun 3, 2012 | 12:55 AM
#2
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
How this kind of stuff gets out of the factory..........................
After compounding steps.
This got missed as well.
After four passes with M101, and two passes with D300.
Roof was not looking so hot, deep marring.
Paint is now defect free.
Tips needed some attention.
"Cleaness"
Working in the engine bay.
Just a light cleaning needed.
Optional forged wheels looking their best..............tires with matte satin sheen.
Alcantara interior needed little.
Finish is glowing.
After compounding steps.
This got missed as well.
After four passes with M101, and two passes with D300.
Roof was not looking so hot, deep marring.
Paint is now defect free.
Tips needed some attention.
"Cleaness"
Working in the engine bay.
Just a light cleaning needed.
Optional forged wheels looking their best..............tires with matte satin sheen.
Alcantara interior needed little.
Finish is glowing.
