2011 Porsche GT3RS Film Install Prep & Correction
#1
07-28-2010 | 04:17 AM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
2011 Porsche GT3RS Film Install Prep & Correction
As these cars are hitting the dealerships, some of my lucky clients are taking delivery of in my opinion one of the best cars in the world presently.
It is a shame that this car left Germany in beautiful condition...... only to be savaged by the port clowns damaging the car, as in the subsequent pics you will see the shipping plastic was still on the car so the local dealership was not guilty this time.
Car as it came in to the shop.
The warning on this should read "Actung......finish hammered by untrained person(s).
I will keep all this stuff intact until after Premier has installed the wrap.
Broke out the Infratech to capture the assault on the finish.
Rear decklid..................incredible:gasp:
Love this cluster of scratches......remember gents this car has 9 MILES on the odometer!!.
Sanded and corrected.
More damage.
After.
Right front wheel arch.
After.
Left front wheel arch.
After.
Carbon wing was dry & marred, 50/50 pic.
After, ready for clear film protection.
After the clear film is installed, I will finish the detail and correction, with a full write up to follow by next week.
It is a shame that this car left Germany in beautiful condition...... only to be savaged by the port clowns damaging the car, as in the subsequent pics you will see the shipping plastic was still on the car so the local dealership was not guilty this time.
Car as it came in to the shop.
The warning on this should read "Actung......finish hammered by untrained person(s).
I will keep all this stuff intact until after Premier has installed the wrap.
Broke out the Infratech to capture the assault on the finish.
Rear decklid..................incredible:gasp:
Love this cluster of scratches......remember gents this car has 9 MILES on the odometer!!.
Sanded and corrected.
More damage.
After.
Right front wheel arch.
After.
Left front wheel arch.
After.
Carbon wing was dry & marred, 50/50 pic.
After, ready for clear film protection.
After the clear film is installed, I will finish the detail and correction, with a full write up to follow by next week.
#4
08-01-2010 | 11:27 AM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
Car @ Premier for the film wrap installation
Here is the car being wrapped, now that it has had that part completed, it is back in my hands for the completion of the job.
Customer brought the car over to Premier.
The RS's are hitting the streets....
Wilson doing his thing.
Eric wrapping the wing.
Customer brought the car over to Premier.
The RS's are hitting the streets....
Wilson doing his thing.
Eric wrapping the wing.
#7
08-08-2010 | 11:59 AM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
GT3RS Correction Cont...
Here are the rest of the pics from the correction.
Here are the rest of the pics................... this car is the "POO".
A little foam gun action.
Engine clean up(which was not bad, go figure a new car not needing much).
Streakfree glass.
Custom frame and snap caps from Rob @ The Paddock in Danville purveyor of custom gear like this which is a "one off" frame.
Matching snap caps= "Tightness" and completes the look.
Backside of the wing DE-swirled.
Paint wearing LSP(Powewrlock x 3 coats over 20 hrs).
Fenix LED pics
Infratech pics.
Trunk plastic cleaned/dressed with a matte finish.
[IMG]http://i409.photobucket.com/albums/pp172/autoconcierge/HHR%20Pictures/House%20GT3RS%208-7-10/HouseGT3RS8-7-10053.jpg[/IMG
Here are the rest of the pics................... this car is the "POO".
A little foam gun action.
Engine clean up(which was not bad, go figure a new car not needing much).
Streakfree glass.
Custom frame and snap caps from Rob @ The Paddock in Danville purveyor of custom gear like this which is a "one off" frame.
Matching snap caps= "Tightness" and completes the look.
Backside of the wing DE-swirled.
Paint wearing LSP(Powewrlock x 3 coats over 20 hrs).
Fenix LED pics
Infratech pics.
Trunk plastic cleaned/dressed with a matte finish.
[IMG]http://i409.photobucket.com/albums/pp172/autoconcierge/HHR%20Pictures/House%20GT3RS%208-7-10/HouseGT3RS8-7-10053.jpg[/IMG
#8
08-08-2010 | 12:01 PM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
GT3RS Correction Cont...
Interior pics.
Close up pic of the glossblack wheels.
Splitter dressed to a matte finish.
Final wipedown before sun pics.
From this ........
Close up pic of the glossblack wheels.
Splitter dressed to a matte finish.
Final wipedown before sun pics.
From this ........
Last edited by Auto Concierge; 08-08-2010 at 12:04 PM.
