1966 Dodge Charger Exterior Correction
#1
04-14-2011 | 06:27 PM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
1966 Dodge Charger Exterior Correction
Just completed detail, this car needed exstensive correction as the body shop left quite a bit of defects behind. This car would have been a great candidate for a re-wetsand of the entire vehicle, but with readings in 700 micron stage the bondo was was there in copius amounts and I did not trust the thickness of the clear(Time to get a DeFelsko 200 from Phil when funds allow...).
This was a referral from the Charger owners brother who I did a Mustang for in the old shop.
Here is the Charger after the wash/decon step..... severe holograms and wetsand pigtails throughout the entire car, my goal was to level the finish safely and bring as much clarity and gloss as possible without wet sanding.
Wetsanding haze and shrink.
Different angle of the shrink evident on rear drivers quarter.
Bodyshop who sanded and cut the car must have did it in the dark!!!! = Hackness.
More display of fine bodywork skills.
Pigtails so deep all that was missing was the "Pig" lol.
Enough complaining.....it was time to make this car look nice for the client, correcting the defects.
Corrected.
Entire drivers door levelled, which also cleared up the shrink using Edge wool pad(Black aggressive).
Not good.......
Some improvement.
Sand scratch dullness.
Cutting thru the defects.
Clarity restored.
This was a referral from the Charger owners brother who I did a Mustang for in the old shop.
Here is the Charger after the wash/decon step..... severe holograms and wetsand pigtails throughout the entire car, my goal was to level the finish safely and bring as much clarity and gloss as possible without wet sanding.
Wetsanding haze and shrink.
Different angle of the shrink evident on rear drivers quarter.
Bodyshop who sanded and cut the car must have did it in the dark!!!! = Hackness.
More display of fine bodywork skills.
Pigtails so deep all that was missing was the "Pig" lol.
Enough complaining.....it was time to make this car look nice for the client, correcting the defects.
Corrected.
Entire drivers door levelled, which also cleared up the shrink using Edge wool pad(Black aggressive).
Not good.......
Some improvement.
Sand scratch dullness.
Cutting thru the defects.
Clarity restored.
#2
04-14-2011 | 06:28 PM
Thread Starter
| TS Detailing Sponsor | California
Joined: Mar 2008
Posts: 878
Shrinked up passenger rear quarter......
Looking dialed in........
More pigtails.......
Handled.......
Heavy holograms from cutting.
All gone after DA polishing with Megs D/300(love this stuff).
On the home stretch......after 40hrs(Tiredness had been achieved).
Another "Issue" I had to deal with was the white mud from left over compound which required steam/and or QD and fine brushes to remove.
Evidence of the "Crustness".
Removed.....
All done!!!.
Looking dialed in........
More pigtails.......
Handled.......
Heavy holograms from cutting.
All gone after DA polishing with Megs D/300(love this stuff).
On the home stretch......after 40hrs(Tiredness had been achieved).
Another "Issue" I had to deal with was the white mud from left over compound which required steam/and or QD and fine brushes to remove.
Evidence of the "Crustness".
Removed.....
All done!!!.
Thread
Thread Starter
Forum
Replies
Last Post
Auto Concierge
Detailing & Paint Protection
9
04-19-2011 04:26 PM
Richie Carbone
Detailing & Paint Protection
2
07-16-2010 06:43 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)