1. Inventory of parts

2. Install the fabspeed box mount to the factory top bracket

3. Put the clamp on the pipe that joins the mufflers together then slide the mufflers together


4. Lift mufflers up in place, this will take two people as one person holds the mufflers up against the top bracket and the other person puts the large clamp around the muffler through the box style hanger start the nut but do not tighten

5. Install bottom mount through clamp and then attach to the stock bottom mount do not tighten

6. Put the clamp around the mid pipe then install the 3 bolt flange into pipe

7. Now slide the mid pipe through car and attach the 3 bolt flange to the headers using the cooper gasket in between, bolt it together do not tighten. Then place the back of the pipe into the muffler using the v band clamp to hold it in place snug

 

8. Now slide the tips on the rear snug them
9. Tighten the 3 bolt flange to seal where the inlet pipes meet the headers then tighten the clamp that joins the flange to the inlet pipe


10. Tighten all bolts starting at the back of the system clamps around the muffler all brackets working your way from back to front while adjusting everything to align the tips


11. Last fine tune the tips by tightening them last making the appearance perfect.

 

Wow, those pipes are beautiful!

 

Love it! There's a good chance I'll be picking up a set of these from you guys for my 987S