LP 560-4 by ENCO Exclusive
#1
11-26-2009, 01:37 PM
Join Date: Oct 2009
Location: Orlando, FL
Posts: 668
LP 560-4 by ENCO Exclusive
ENCO Exclusive has unveiled a new styling and performance package for the Lamborghini Gallardo LP 560-4.
The German-based tuner offers a variety of carbon fiber exterior components such as a front bumper (€2990), a boot cover (€3990), a front splitter (€990), and aggressive side skirts (€3990). Other goodies include a carbon fiber laminate for the rear diffuser, mirrors and boot lid vents (€4000) as well as a matt black foil wrap (€3000).
Inside, ENCO offers faux carbon fiber trim for the steering wheel, central console, dashboard, handbrake, and door handles (€5000).
If you find all this a tad vulgar, you might want to check out ENCO's performance package for the 5.2-liter V10. While details are limited, it enables the engine to produce 620 hp and 575 Nm of torque (instead of 560 hp and 540 of torque).
ENCO Exclusive Lamborghini Gallardo LP 560-4
Fighting Bull
At a time when most designers swear by curves and shapes which flow and merge, the Lamborghini Gallardo created by Belgian stylist Luc Donckerwolke dropped in 2003 like the proverbial bomb. Look for curves in this vehicle and - except where they are technically essential - you will look in vain. Edges and corners define the front, sides and tail. Donckerwolke's courage in producing such clear-cut shapes and his ability to combine them in a harmonious whole has earned him the renowned red dot design award for the Gallardo and its big brother Murcielaga, which has been following the same design concept since 2001.
As time went on, the sports car manufacturer from Sant' Agata, Bolognese, launched a range of Gallardos including an open-top Spyder and the lightweight and high performance "Superleggera". In 2008, the Italian firm finally carried out some fundamental technical and optical modelling on its "small" sports car, also improving the styling even further. The front section of the V10 racer, now known as the Gallardo LP 560-4, has since been even more aggressive.
Known for its stylish finishing, ENCO Exclusive from the Saxon town of Chemnitz has now created a customised carbon fibre glove for the Gallardo LP 560-4's lean mean body. The GT3 design front bumper is 100% carbon fibre and has three large gills on each side where the fibre strands are clearly visible. Two additional carbon fibre finish aerodynamic components are available to fit both this and the series bumper: the front splitter and the rear spoiler. The GT3 side skirts may be unobtrusive, but they make the Lamborghini as a whole appear even bigger and stronger. The boot cover for this mid-engine racer- what in normal cars is the engine hood - is also ultra-lightweight but highly resilient carbon fibre. The rear diffuser, wing mirrors and air vents in the boot lid are finished in carbon fibre laminate. Top quality matt foil adds the finishing touches, giving the angular Gallardo the look of a stealth fighter plane. ENCO Exclusive has also had a field day with carbon look laminate in the interior. The inlay on the wheel, the cover on the central console and dashboard and the handbrake shine in silvery black - as do the door handles and openers.
Enco has also been at work on the 5.2 litre V10 engine. After some serious power treatment, the ten cylinder with its menacing roar now reaches not 560, but an impressive 620HP. The maximum torque is now up from 540 to 575 Newton metres.
Prices:
100% carbon fibre GT3 front bumper: 2990 euros
Carbon fibre finish front splitter for series and GT3 bumper: 990 euros
Carbon fibre finish rear spoiler for series and GT3 bumper: 1990 euros
Carbon fibre finish GT3 design side skirts: 3990 euros
Carbon fibre finish boot cover: 3990 euros
Carbon fibre laminate for rear diffuser, mirrors and boot lid vents: 4000 euros
Carbon fibre interior finish: 5000 euros
Matt black foil: 3000 euros
Power increase to 620 HP / 575 Nm: on request
Full details, prices and delivery information are available from: ENCO Exclusive
The German-based tuner offers a variety of carbon fiber exterior components such as a front bumper (€2990), a boot cover (€3990), a front splitter (€990), and aggressive side skirts (€3990). Other goodies include a carbon fiber laminate for the rear diffuser, mirrors and boot lid vents (€4000) as well as a matt black foil wrap (€3000).
Inside, ENCO offers faux carbon fiber trim for the steering wheel, central console, dashboard, handbrake, and door handles (€5000).
If you find all this a tad vulgar, you might want to check out ENCO's performance package for the 5.2-liter V10. While details are limited, it enables the engine to produce 620 hp and 575 Nm of torque (instead of 560 hp and 540 of torque).
ENCO Exclusive Lamborghini Gallardo LP 560-4
Fighting Bull
At a time when most designers swear by curves and shapes which flow and merge, the Lamborghini Gallardo created by Belgian stylist Luc Donckerwolke dropped in 2003 like the proverbial bomb. Look for curves in this vehicle and - except where they are technically essential - you will look in vain. Edges and corners define the front, sides and tail. Donckerwolke's courage in producing such clear-cut shapes and his ability to combine them in a harmonious whole has earned him the renowned red dot design award for the Gallardo and its big brother Murcielaga, which has been following the same design concept since 2001.
As time went on, the sports car manufacturer from Sant' Agata, Bolognese, launched a range of Gallardos including an open-top Spyder and the lightweight and high performance "Superleggera". In 2008, the Italian firm finally carried out some fundamental technical and optical modelling on its "small" sports car, also improving the styling even further. The front section of the V10 racer, now known as the Gallardo LP 560-4, has since been even more aggressive.
Known for its stylish finishing, ENCO Exclusive from the Saxon town of Chemnitz has now created a customised carbon fibre glove for the Gallardo LP 560-4's lean mean body. The GT3 design front bumper is 100% carbon fibre and has three large gills on each side where the fibre strands are clearly visible. Two additional carbon fibre finish aerodynamic components are available to fit both this and the series bumper: the front splitter and the rear spoiler. The GT3 side skirts may be unobtrusive, but they make the Lamborghini as a whole appear even bigger and stronger. The boot cover for this mid-engine racer- what in normal cars is the engine hood - is also ultra-lightweight but highly resilient carbon fibre. The rear diffuser, wing mirrors and air vents in the boot lid are finished in carbon fibre laminate. Top quality matt foil adds the finishing touches, giving the angular Gallardo the look of a stealth fighter plane. ENCO Exclusive has also had a field day with carbon look laminate in the interior. The inlay on the wheel, the cover on the central console and dashboard and the handbrake shine in silvery black - as do the door handles and openers.
Enco has also been at work on the 5.2 litre V10 engine. After some serious power treatment, the ten cylinder with its menacing roar now reaches not 560, but an impressive 620HP. The maximum torque is now up from 540 to 575 Newton metres.
Prices:
100% carbon fibre GT3 front bumper: 2990 euros
Carbon fibre finish front splitter for series and GT3 bumper: 990 euros
Carbon fibre finish rear spoiler for series and GT3 bumper: 1990 euros
Carbon fibre finish GT3 design side skirts: 3990 euros
Carbon fibre finish boot cover: 3990 euros
Carbon fibre laminate for rear diffuser, mirrors and boot lid vents: 4000 euros
Carbon fibre interior finish: 5000 euros
Matt black foil: 3000 euros
Power increase to 620 HP / 575 Nm: on request
Full details, prices and delivery information are available from: ENCO Exclusive
