FS: Klassen's new M52-Rs for 997TT | In Stock Ready to Go
Feb 10, 2013 | 08:52 PM
#1
Thread Starter
| Former Sponsor
Joined: Jan 2010
Posts: 202
From: Pasadena, CA
FS: Klassen's new M52-Rs for 997TT | In Stock Ready to Go
I've got a few sets of Klassen's brand new wheel design, the M55-R, in stock ready to ship for 997TT
The wheel specs:
PORSCHE 997 TWIN TURBO - 19X8.5 front AND 19X12.0 rear & 20X8.5 front AND 20X12.0 rear
Please PM/Email me for pricing information (Gor@AcutePerformance.com)
The wheel specs:
PORSCHE 997 TWIN TURBO - 19X8.5 front AND 19X12.0 rear & 20X8.5 front AND 20X12.0 rear
Please PM/Email me for pricing information (Gor@AcutePerformance.com)
Feb 16, 2013 | 07:39 AM
#3
Thread Starter
| Former Sponsor
Joined: Jan 2010
Posts: 202
From: Pasadena, CA
KLASSEN Leichtmetallrader is a company which focuses strictly on quality, exclusivity and durability. These wheels are not for everyone but only for those who know the difference and can afford to choose.
The wheels are made from 6061 aerospace grade aluminum. The forgings are made with a 8000 lbs. hydraulic press which is better than conventional rotary forgings that are standard for most other forged wheels. Before cutting, the aluminum goes through the T-6 heat treatment process in order to significantly increase the durability of the material.
The bolts that hold the wheels together are proprietary to KLASSEN. They can withstand 165,000 PSI where the standard bolt can only handle 120,000 PSI. Unlike most other 3-piece wheels, none of KLASSEN wheels use regular hardware bolts found in home improvement stores.
KLASSEN products are among the few that meet both JWA and TUV quality standards. They are made and assembled in USA and show the quality that is easily distinguished by naked eye.
The wheels are made from 6061 aerospace grade aluminum. The forgings are made with a 8000 lbs. hydraulic press which is better than conventional rotary forgings that are standard for most other forged wheels. Before cutting, the aluminum goes through the T-6 heat treatment process in order to significantly increase the durability of the material.
The bolts that hold the wheels together are proprietary to KLASSEN. They can withstand 165,000 PSI where the standard bolt can only handle 120,000 PSI. Unlike most other 3-piece wheels, none of KLASSEN wheels use regular hardware bolts found in home improvement stores.
KLASSEN products are among the few that meet both JWA and TUV quality standards. They are made and assembled in USA and show the quality that is easily distinguished by naked eye.
Feb 16, 2013 | 12:18 PM
#4
Teamspeed Rookie
Joined: Mar 2009
Posts: 27
KLASSEN Leichtmetallrader is a company which focuses strictly on quality, exclusivity and durability. These wheels are not for everyone but only for those who know the difference and can afford to choose.
The wheels are made from 6061 aerospace grade aluminum. The forgings are made with a 8000 lbs. hydraulic press which is better than conventional rotary forgings that are standard for most other forged wheels. Before cutting, the aluminum goes through the T-6 heat treatment process in order to significantly increase the durability of the material.
The bolts that hold the wheels together are proprietary to KLASSEN. They can withstand 165,000 PSI where the standard bolt can only handle 120,000 PSI. Unlike most other 3-piece wheels, none of KLASSEN wheels use regular hardware bolts found in home improvement stores.
KLASSEN products are among the few that meet both JWA and TUV quality standards. They are made and assembled in USA and show the quality that is easily distinguished by naked eye.
The wheels are made from 6061 aerospace grade aluminum. The forgings are made with a 8000 lbs. hydraulic press which is better than conventional rotary forgings that are standard for most other forged wheels. Before cutting, the aluminum goes through the T-6 heat treatment process in order to significantly increase the durability of the material.
The bolts that hold the wheels together are proprietary to KLASSEN. They can withstand 165,000 PSI where the standard bolt can only handle 120,000 PSI. Unlike most other 3-piece wheels, none of KLASSEN wheels use regular hardware bolts found in home improvement stores.
KLASSEN products are among the few that meet both JWA and TUV quality standards. They are made and assembled in USA and show the quality that is easily distinguished by naked eye.
Feb 16, 2013 | 12:50 PM
#5
Thread Starter
| Former Sponsor
Joined: Jan 2010
Posts: 202
From: Pasadena, CA
The description is supposed to be for all of their wheels, no they are not 3-piece, but they are still made with the same material and go through the same build process