BEMBO*** New Product ***BREMBO
#1
BREMBO*** New Product ***BREMBO
Hello Teamspeed'ers,
Just wanted to take a moment and show you guys some new products we've recently released for the Porsche 996 and 997 cars,...Turbo / GT3 / GT2 models,...including steel and PCCB models.
BREMBO 2pc. fully floating replacement discs
(for use with OEM calipers)
- Lightweight - for unsprung and rotational weight savings.
- Full Floating - seeks true center line for crisp response, improved pad and rotor wear.
- Patented McLaren Rotor Harware - allows for full floating function while eliminating noise.
- Superior Metallurgy - the highest quality and LONGEST lasting rotor options available.
- Cross Drilled /or/ Type 3 Slot Pattern - Improves initial bite and release characteristics for improved modulation and control.
- Top Level Motorsports Design - Bringing the the best possible quality and performance from the track to your daily driver / weekend warrior / track day or club race car.
350mm 2pc. Type 3
330mm 2pc. Cross Drilled
Keep your factory calipers and improve you braking performance.
Improved longevity helps reduce consumable costs over time.
Full assemblies start at $1495 per pair...replacement discs start at $389 ea.
Just wanted to take a moment and show you guys some new products we've recently released for the Porsche 996 and 997 cars,...Turbo / GT3 / GT2 models,...including steel and PCCB models.
BREMBO 2pc. fully floating replacement discs
(for use with OEM calipers)
- Lightweight - for unsprung and rotational weight savings.
- Full Floating - seeks true center line for crisp response, improved pad and rotor wear.
- Patented McLaren Rotor Harware - allows for full floating function while eliminating noise.
- Superior Metallurgy - the highest quality and LONGEST lasting rotor options available.
- Cross Drilled /or/ Type 3 Slot Pattern - Improves initial bite and release characteristics for improved modulation and control.
- Top Level Motorsports Design - Bringing the the best possible quality and performance from the track to your daily driver / weekend warrior / track day or club race car.
350mm 2pc. Type 3
330mm 2pc. Cross Drilled
Keep your factory calipers and improve you braking performance.
Improved longevity helps reduce consumable costs over time.
Full assemblies start at $1495 per pair...replacement discs start at $389 ea.
Last edited by Brembo_Support; 04-20-2009 at 04:55 PM.
#4
Yes, these are directional.
72 vein, curved design, for impressive heat management.
High heat capacity, superior heat dissipation.
72 vein, curved design, for impressive heat management.
High heat capacity, superior heat dissipation.
#5
So, better than the cross drilled for heat dissipation? What size to replace 996 TTS PCCB's for track use?
#9
The PCCB option for the 996 TT uses the 350mm disc diameter with 72 vein design.
So the answer to your inquiry is that you will be using the 350mm disc.
For non-PCCB 996 TT's:
The 48 vein disc is also directional and curved, and features a wide air gap which helps to increase the air volume through the disc. That happened to be the optimal design we found during testing for that diameter, thickness, annulus.
The reason we only offer the drilled version for the 99TT, with the stock 4-piston calipers, is because we do not offer a rear upgrade at this time. Our feedback was that the majority of the consumers would want the setup to match aesthetically with what they would have in the rear. The Brembo discs are cast, and the drilling is done during the second stage. The drilled holes are in a specifically engineered pattern where they do not penetrate the vein structure and compromise the structural integrity, the hole diameter is based on the thickness of the disc plates, and the number of holes is chosen to allow for optimal cooling and refreshing of the disc and pads without increasing the chance of stress cracking and fatigue. The result is a drilled disc without the common misconception or increased chance of premature cracking.
For those of you with a 996TT, with 4-piston calipers, there are options to be able to use the larger 350mm disc with the Type 3 slot pattern if you are aggressively tracking your car.
For spirited street driving and the occasional HPDE or track day, the 330mm discs have proven to work exceptionally well and offer at least 2 x's the life of the OEM discs.
#10
PCCB = 380mm discs
Steel = 350mm discs
We offer the 2pc. fully floating discs for either option.
These are an incredible upgrade with all of the benefits I listed above.
Another option if you want to go beyond just the 2pc. disc upgrade is to go with a full Big Brake Upgrade...
But that's a whole different thread topic I'll get started soon.
The 2pc. discs are probably the biggest bang for the buck, and offer the best ROP (Return Of Performance), dollar for dollar.
The BBK's are the next level up the performance food chain and geared more towards the person who is truly dedicated to getting to that next level.