White 2008 997S Modified by SharkWerks
 

Hey guys,
This local 2008 997S came into to us a short while back for an extreme make-over. As far as power goes, every bolt-on possible was installed, including our light weight flywheel kit. The Bilstein PASM coil over kit, sway bars and choice aero parts were also added along with some HRE C-21 wheels. I thought it was a neat car that many of you would enjoy.

First things first, the EVO V-Flow intake is installed along with the RSS Plenum (which reduces turbulence):
http://www.sharkwerks.com/forum_phot...lywheel_14.JPG

On goes the EVOMSit performance software calibrated for the light weight flywheel and 91 octane:
http://videos.g33kd.net/EVOMSit_tuni...9/P1070200.JPG

The restrictive stock headers are prime for a set of longer-tube equal length EVO replacements.
http://www.sharkwerks.com/forum_phot...lywheel_03.JPG

A full performance exhaust system is also installed along with the headers:
http://www.sharkwerks.com/forum_phot...lywheel_13.JPG

A pair of larger dual tips are also installed for a more aggressive look:
http://www.sharkwerks.com/forum_phot...lywheel_11.JPG

The stock suspension is removed in favor of the Bilstein PASM Damptronic (with H&R sway bars) kit and lowered by 1.5 inches:
http://www.sharkwerks.com/forum_phot...lywheel_10.JPG

Off comes the transmission in preparation for a light weight flywheel installation:
http://www.sharkwerks.com/forum_phot...lywheel_05.JPG

The stock flywheel is now ready for removal to be replaced by the single mass SharkWerks light weight flywheel kit for better acceleration:
http://www.sharkwerks.com/forum_phot...lywheel_07.JPG

In she goes along with a 50% weight reduction in rotating mass!
http://www.sharkwerks.com/forum_phot...lywheel_09.JPG

Originally she had the Rinspeed INDY front bumper, side skirts, rear bumper and wing installed. The front was later changed to the more aggressive factory 997GT3 bumper:
http://www.sharkwerks.com/forum_phot...lywheel_16.JPG

There she is with the Rinspeed rear bumper and wing:
http://www.sharkwerks.com/forum_phot...lywheel_17.JPG

19 inch HRE C-21 Competition wheels were chose in a brushed/clear finish with polished lips:
http://www.sharkwerks.com/forum_phot...lywheel_18.JPG

Here she is on display wearing her "SharkWerks" badging at a local car show:
http://www.sharkwerks.com/forum_phot...lywheel_02.jpg
http://www.sharkwerks.com/forum_phot...t_flywheel.jpg

Here's a video of the car in action!
YouTube - C2S.wmv

very nice and clean looking.

Love the kit that's on it. Bet it's insane with that rear and a GT3 front...Great job once again fellas

Car sounds/looks great in the vid too!

I must say.....she looks amazing!

great job

any more pics of the martini-esque between it and the green RS? neat looking car!(yours)

very nice :)

Damn that is niceeeee, LWFW makes a huge difference too, nice upgrade!

Sweet!