[cupcake of bahrain]

I only did two runs last night! And then had to rush home for dinner!

My first run was with MDM on, D5. And I got a lousy 13.334@187km/h. My 2nd run I decided to run in S6 with DSC off of course. But had to be very gentle off the line.. but stil can't seem to control the bogging!

Now I know for a fact that if I had done another run, I would have used Launch Control for the first time in my life... and most certainly knocked a whole second of my time. But I would probably have ended up with my rear end diffs or shaft all over the start line!

I was running on OEM wheels and OEM Conti tyres.

Here's the video of my 2nd run

[strebo]

That thing hauls ass!

[tips]

niiice

[Sideways_swe]

with that trapspeed your in the 11s with a perfect start! Great run

[BigE]

I have seen and run against numerous E60's at the Wednesday night drags at Infineon. The only time I have ever seen one break 13 sec. is with the DSC on with a hard launch at high rpms. The E60 has no low end torque, but it pulls like a freight train at high rpms. The key to a low ET is that all important 60' time. For an E60 to run well into the 12's, you will need a 60' time of 1.9 or lower. You will need to use the DSC with a hard launch to get that time.

Here is a post I made after going against an E60 in my 71 Bronco at Infineon. (FYI my Bronco has 600 hp ) I ran a 13.1 at 101 with a 1.9 60', he ran a 13.3 at 113 with a 2.3 60' time.

Quote:

Originally Posted by BigE »

Here is the time slip from last night when I took the Bronco to the strip for open drag night at Infineon. A new M5 was in the other lane. I launched the Bronco easy (no brake stand and squeezed into the throttle as opposed to brakestanding and/or stomping the throttle off the line) and manually shifted at 5,000 rpms (let off gas, move lever, stomp on gas). It was not breathing well above 5k rpms The shift from 2nd to 3rd at 90 or so mph killed my trap speed. Still a 13.1 on 32" off-road tires with a soft launch and slow/short-shifting is not bad

I was not sure how it was going to run, but this was a great first run. It launched easy and ran straight and true down the strip. The guy driving the M5 was stunned when I jumped out 3-4 lengths on him right off the line and held him off for the entire run.

Its time to put the Bronco on a chassis dyno with a computer hooked up to it. Need to dial in the high-rpm A/F mixture as well as the trans shift points. I see low 12's out of this beast very soon

The Bronco was car 189 on the slip. The other car on this slip was a new M5.

[BRN813]

Nice numbers bro. you should have fitted DR's and do a high rpm launch and you would've easily taken a whole second off the slip.

but i know you dont wanna be dealing with EM later.

[mtechnik]

Very impressive, bro! Nice vid and your E60 M5 is sick!

[cupcake of bahrain]

Thanks guys, some still shots!

[03-turbo911]

Pretty fast time for something as heavy as the M5!

[MeanMachine]

Thats not a decent launch, its pretty good what I liked is when Stang LX 5.0 in your rear view mirror.