Detailed: MINI Copper S John Cooper Works! (1/2)
#1
Detailed: MINI Copper S John Cooper Works! (1/2)
I recently had the opportunity to detail this incredible John Cooper Works Mini Cooper S for a good friend of mine. This car is a daily driver that needed some love. Hope you enjoy!
The before's:
I started with the interior first. The Mini was vacuumed with a MetroVac, then the entire interior was scrubbed and wipes down with Adam's Leather and Interior Cleaner. Protection was added with Adam's Leather Conditioner.
All weather floor mats were cleaned with Adam's APC and rinsed.
Next was the engine bay and wheels. Engine was sprayed down with Adam's APC , then agitated with a Boar's Hair Brush and dried with the MetroVac.
Tires and wheel wells were sprayed with APC and cleaned with a Fender Brush.
[/IMG]
Adam's Green Wheel Cleaner was sprayed on wheels. Rims were cleaned with a PowerStick and wheels/calipers with a Boar's Hair Brush.
Results:
The exterior was up next. All plastic trim was sprayed with APC and scrubbed with a Dressing Applicator. This set preps these surfaces for a coat of Adam's VRT later in the detail.
Adam's Foam gun time!
After a rinse down the exterior was completely sprayed with Adam's Detail Spray. This step help lubricate the paint for drying and neutralizes the water, preventing water spots.
Door jams cleaned with Adam's Waterless Wash.
The before's:
I started with the interior first. The Mini was vacuumed with a MetroVac, then the entire interior was scrubbed and wipes down with Adam's Leather and Interior Cleaner. Protection was added with Adam's Leather Conditioner.
All weather floor mats were cleaned with Adam's APC and rinsed.
Next was the engine bay and wheels. Engine was sprayed down with Adam's APC , then agitated with a Boar's Hair Brush and dried with the MetroVac.
Tires and wheel wells were sprayed with APC and cleaned with a Fender Brush.
[/IMG]
Adam's Green Wheel Cleaner was sprayed on wheels. Rims were cleaned with a PowerStick and wheels/calipers with a Boar's Hair Brush.
Results:
The exterior was up next. All plastic trim was sprayed with APC and scrubbed with a Dressing Applicator. This set preps these surfaces for a coat of Adam's VRT later in the detail.
Adam's Foam gun time!
After a rinse down the exterior was completely sprayed with Adam's Detail Spray. This step help lubricate the paint for drying and neutralizes the water, preventing water spots.
Door jams cleaned with Adam's Waterless Wash.
Last edited by DJ; 09-15-2010 at 05:47 PM. Reason: Fixed spacing and double IMG tags
#3
Car was completely clayed including all the glass.
The swirls in the Pepper White paint were hard to photograph, but the black roof shows the paint condition well.
A Porter Cable 7424XP was used with a Orange 7.5" Adam's foam pad with Swirl and Haze Remover, then followed with a White 7.5" pad with Fine Machine Polish.
Results:
A coat of Adam's Premium Americana Paste Wax was added for protection and paint depth.
Interior painted surfaces were treated with Adam's Brilliant Gaze.
The cars trim was up next. Adam's water repellent Super VRT was applied.
All of the hard to reach area's were sprayed with Adam's In and Out Spray.
All metal surface were then clean with Adam's Metal Polish.
Glass was the final step. The glass inside and out were cleaned with Adam's Glass Cleaner and Glass Microfiber towel. The windshield was protected with a coat of Adam's Glass Sealant. This help the water bead on the glass to the extent you barely will every use your wipers in the rain again.
Hazing of product before it is removed.
And finally the "afters":
Cheers!
The swirls in the Pepper White paint were hard to photograph, but the black roof shows the paint condition well.
A Porter Cable 7424XP was used with a Orange 7.5" Adam's foam pad with Swirl and Haze Remover, then followed with a White 7.5" pad with Fine Machine Polish.
Results:
A coat of Adam's Premium Americana Paste Wax was added for protection and paint depth.
Interior painted surfaces were treated with Adam's Brilliant Gaze.
The cars trim was up next. Adam's water repellent Super VRT was applied.
All of the hard to reach area's were sprayed with Adam's In and Out Spray.
All metal surface were then clean with Adam's Metal Polish.
Glass was the final step. The glass inside and out were cleaned with Adam's Glass Cleaner and Glass Microfiber towel. The windshield was protected with a coat of Adam's Glass Sealant. This help the water bead on the glass to the extent you barely will every use your wipers in the rain again.
Hazing of product before it is removed.
And finally the "afters":
Cheers!
Last edited by DJ; 09-15-2010 at 05:42 PM. Reason: Fixed spacing and double [img] tags
Thread
Thread Starter
Forum
Replies
Last Post
DD GT3 RD
General BMW | Mini
16
09-08-2010 04:26 AM
BrakeL8
Automobiles
4
11-17-2009 09:19 PM
Jack628
General BMW | Mini
3
09-01-2008 11:31 PM
DJ
General Automotive & SUV Forum
2
02-26-2008 11:02 AM
Bookmarks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)